Finally, a stand-up system that quickly and securely
fastens PEX tubing to wire mesh!

Saves time...
The tool accommodates up to 100 clips from
self-loading boxes, and attaches tubing
in half the time.

Saves your knees and back...
No more crawling over wire mesh and gravel.
No more bending to apply plastic ties.

One tool, one motion...
The Mesh Clip™ Installation Tool positions
the tubing, lifts the wire, and applies the clip.

U.S. Patents 6,298,549
& 6,606,786 & 6,779,241
Other Patents Applied

Once loaded, position the Mesh Clip™ Installation Tool over the PEX tubing and push the front forks under the wire mesh, and depress the handle. The "grabbers" inside the body will steady the wire and tubing and apply the clip in one continious motion. The tubing will then be ready for the concrete pour.

PEX-2-Mesh Clips™ are packaged in
self-loading boxes of 50 clips. Inserting the
top of the tool into the end of the box and
tilting the tool will allow the clips to slide
down the rails of the tool and into position.

for use in:
radiant heating systems

for use on:
1/2" or 5/8" PEX tubing installed
onto wire mesh over gravel or
foamboard insulation

use ONLY:
PEX-2-Mesh Clips™